High Purity Titanium Hex Rod - Custom Lengths from China Suppliers and Factory, Ideal for Industry Applications

Common grades are TA1, TA2, etc. TA1 has good plasticity and toughness, suitable for parts working at lower temperatures, such as chemical equipment in the tube, bar, wire, etc., as well as the electrode in the electronics industry, electrolytic cathode, etc. TA2 is based on TA1 to improve its requirements, such as lower impurity content, with enhanced corrosion resistance and mechanical properties. It is commonly used in the manufacture of chemical equipment, reactors, towers, pipes, and other parts. It exhibits better corrosion resistance and mechanical properties, and is commonly used in the manufacture of chemical equipment, such as reactors, towers, pipelines, and other components.

Common grades are TC4, GR5, etc. TC4 is an α-β type titanium alloy with good overall mechanical properties, which can work for a long time at 400 ℃, widely used in aerospace, chemical, medical, and other fields, such as manufacturing aircraft engine parts, chemical equipment, shaft parts, implants in medical equipment, etc. GR5 is also an α-β type titanium alloy, which is a high-strength, strong corrosion alloy, suitable for the manufacture of chemical equipment, reactors, pipelines, and other parts. GR5 is also an α-β type titanium alloy with high strength and corrosion resistance, which is suitable for the manufacture of high-strength fasteners in the fields of aviation and aerospace.

Titanium ingots are tested first, then forged, then work-hardened and annealed, then machined, then stress-relief annealed, and finally machined on the inner and outer surfaces, tested for dimensions, tested for performance, etc., and marked for storage.

The titanium ingot is tested and hot rolled, then work-hardened, annealed, then machined and stress relieved, and finally, the internal and external surfaces are machined, tested, and labeled for storage.